Sliding Glass Doors:
Completely fabricated at the factory and shipped KD. Carton includes all
components, hardware and screws for assembly.
Material: Main frame and panel members are
extruded aluminum alloy 6063-T5. Screw fasteners are zinc-plated per ASTM
specifications A-164-71 or A-165-71.
Frame:
The frame consists of a head, sill and jambs designed for joining with two
screws at each corner.
Weatherstripping:
All panels are double weather-stripped to ensure a tight seal and minimize
air infiltration.
Hardware: Pull
and latch set are sturdy. Door locks securely, and operates easily.
Finish: Doors
are available in white, bronze.
Glazing: Panels
may be glazed with 1/8", 5/32" or 5/8" glass with glazing vinyl specified by
purchaser. Note: glazing must be in accordance with ANSI Z-97-1-1972 and FS
DD-G-140A.
Installation:
Assembly and installation shall be done in accordance with good standard
construction practices. Doors may be installed with mounting fin to the
inside or outside, depending on the particular job, with panel arrangement
as desired.
